 
CT-4-400, CT-4-800
& CT-4-1600 Series
Scale and Corrosion Inhibitor • Water Treatment for
Cooling Towers
RENEW YOUR WATER LINES... CT-4-400, CT-4-800
& CT-4-1600 Series Scale and Corrosion Inhibitor©
for Industrial Water Treament© will increase
the efficiency of your "open recirculating water system"**
for cooling towers or humidifiers by 10%, 25% or even 50%!
Cooling Towers, Humidifiers, Evaporative Condensers, Air Washers,
or Once-Through Units will all benefit from the CT-4-400,
800 and 1600 Series of Concentrates. A unique blend of chemistries
form a barrier against corrosion, and prevent sludge/scale build up
in water lines. Flow capacity and system life will increase, and pumping
costs will decrease in one easy step... the most cost-effective way
of improving cooling and humidifier efficiency*.
"Realize up to a 25% increase in the heat transfer efficiency
for your cooling tower, or heat exchanger by eliminating 1/8"
scale build up with CT-4-400, 800 and 1600 Series
Scale and Corrosion Inhibitors©, or up
to a 50% efficiency increase by eliminating 3/8" scale build
up.*
The CT-4-Series Scale and Corrosion Inhibitors©
organophosphonate residual gives a very slow and constant
descaling action to all lines. The CT-4-Series contains inhibitors
and deflocculants for holding sludge in suspension. It protects system
fouling from contaminants such as calcium, silica, iron, sludge and
organics.
DAC's CT-4-Series Scale and Corrosion Inhibitor©
offers a selection of liquid concentration strengths. CT-4-400,
CT-4-800 & CT-4-1600... concentrates for every type of
system capacity and application. Let a DAC Technical Sales Representative
evaluate your system. The correct concentrate, replenishment technique,
monitoring method and chemical handling will be recommended.
*Results may vary due to system age, condition, product application,
or other factors.
**Use DAC RP-4-47 Concentrate for "closed water recirculating
systems"
MC-16
Acid Descaling Compound • Water Treatment for Cooling
Towers
MC-16 is a dry sulfamic acid system cleaner and descaler.
MC-16 quickly and safely removes accumulations of
scale, corrosion and organic matter. It does this in a wide range
of open and closed recirculating cooling and heating water systems,
including boilers and heat exchangers.
MC-16 is the product of choice for online cleaning
and descaling of water systems where minimum corrosion of the system
metals is critical. Properly applied, it will solubilize and disperse
calcium, rust, organic matter, oil, sludge and other foulants. Old
and heavily fouled systems can be cleaned in this manner with minimum
potential for corrosion or plugging.
|
